Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Jimny
    4. : Suzuki Jimny timing belt replacement guide 1

Suzuki Jimny - Video tutorial

Model: Suzuki Jimny Jb53, Jb23, Jb43, Jb33 - Years 1998-2018
Part: Timing belt
Operation: Suzuki Jimny timing belt replacement guide 1

In this guide we see the main steps and some instructions regarding the replacement of the Suzuki Jimny first series timing belt; usually the timing belt should be changed around 75,000 km, carrying out a visual check before this mileage. Then we open the bonnet and start by removing the V-belt, unscrewing the screws of the crankshaft pulley; then we remove the timing cover to access the belt. We carry out the process of disassembling and replacing the timing belt.


Posted on 25 November 2022 by ScegliAuto



How do you replace the timing belt on a Suzuki Jimny?
Suzuki Jimny (1998-2018 / Jb53, Jb23, Jb43, Jb33) In order to replace the timing belt on the Suzuki Jimny, you need to open the hood to access the front part of the engine compartment, where the pull
How to replace the service belt of a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb53, Jb23, Jb43, Jb33) Before we can start, we will have to go and open the front hood of our Suzuki Jimny. So let's start by loosening the belt tensioner, slightly unscrew
How to replace the timing belt on Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb53, Jb23, Jb43, Jb33) Loosen the belt tensioner "pulley" with a polygonal key (15x16 or 16x17) with double curve, otherwise you will not pass. This hex is 16 and is in a h

    Frequently Asked Questions

    • Jimny 2018-2030 - After how many km should the Suzuki Jimny timing belt be replaced? Read Answer
    • Jimny 2018-2030 - After how many km do you need to replace the timing belt of a petrol Suzuki Jimny? Read Answer

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos