Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Change Light on a 2012 Suzuki Vitara

Model: Suzuki Vitara JT - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

This guide describes the procedure to reset the oil change light for the 2012 Suzuki Vitara. Follow these steps in order: 1. Activate the instrument cluster to ensure the oil change light is still active; 2. Immediately after, turn off the instrument cluster and hold down the accelerator pedal for a few seconds; 3. Meanwhile, reactivate the instrument cluster and press the brake pedal 4 times in succession; 4. Sometimes it may be necessary to press the brake pedal 1 or 2 more times, so if the light does not turn off, repeat step 3 but refine it with step 4; 5. At this point, the oil change light will turn off. To ensure you have followed the steps correctly, restart the instrument cluster and check that the light has indeed turned off.


Updated on 10 July 2026 by ScegliAuto


Related tutorials

Suzuki Vitara (2015-2024 / LY) Before you begin, open the bonnet of your Suzuki Vitara Boosterjet 1.4. Start by pulling out the dipstick, cleaning it, reinserting it, and then pull…
Suzuki Vitara (2015-2024 / LY) The TPMS light activates on the instrument panel of the Suzuki Vitara when it is necessary to adjust the tyre pressure; therefore, before resetting t…
Suzuki Vitara (2015-2024 / LY) Good morning, today’s objective is to reset the "Service" light on your Suzuki Vitara. Start by sitting in the driver’s seat, then turn on the instru…

    Frequently Asked Questions

    • Vitara 2015-2024 - How to reset the Suzuki Vitara "Change engine oil" warning light? Read answer
    • Vitara 2015-2024 - What is the oil warning light in the Suzuki Vitara and what does it indicate? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos