Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Chain on a Suzuki SX-4?

Model: Suzuki Sx4 GY, MK 1, EY, RW - Years 2006-2014
Part: Timing belt

To replace the timing chain on a Suzuki SX-4, you must completely remove the engine block from its housing. Once the engine block is extracted, loosen the bolts securing the valve cover and the one located on the left side of the block. At this point, you can loosen the bolts securing the chain tensioner, reducing the tension on the chain and removing it from its seat. After removal, you can reassemble all the components that were previously taken off.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the timing chain of the Suzuki SX-4?
How do you replace the timing chain of the Suzuki SX-4?
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) The procedure for replacing the timing chain of the Suzuki SX-4 is carried out by opening the hood so that access to the left side of the engine bloc…
What is the replacement interval for the timing belt on the Suzuki Sx4
What is the replacement interval for the timing belt on the Suzuki Sx4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) The timing belt is a toothed rubber strip that transmits the movement from the crankshaft to the camshafts, which control the opening and closing of …
How do you replace the timing chain of the Suzuki SX-4?
How do you replace the timing chain of the Suzuki SX-4?
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) The procedure for replacing the timing chain on the Suzuki SX-4 is carried out by completely removing the engine block from its housing compartment: …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos