Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Suzuki SX4?

Model: Suzuki Sx4 MK 1, RW, EY, GY - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Engine oil

See other generations:
Video tutorial

To replace the engine oil in the Suzuki SX4, you need to loosen the drain plug on the oil sump, which is located at the bottom of the engine compartment: once the plug is loosened, you can collect all the oil in a container. After the oil has completely drained out, open the bonnet and access the engine compartment: on the right side of the engine block, you will find the filler cap for topping up. Add the necessary amount of oil and then close the bonnet.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

Replacing the Oil Filter on a Suzuki SX4
Replacing the Oil Filter on a Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) This tutorial demonstrates how to replace the engine oil filter on a Suzuki SX4, first series model with a petrol engine. To replace the oil filter, …
How to change the engine oil in the Suzuki Sx4?
How to change the engine oil in the Suzuki Sx4?
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) To replace the engine oil in the Suzuki Sx4, lift the car on a workshop ramp or on axle stands. The oil is extracted from the bottom of the car, maki…
Where is the Thermostat in the Suzuki SX4?
Where is the Thermostat in the Suzuki SX4?
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) This video shows where the thermostat is located in the Suzuki SX4, useful if you need to replace it. As shown, the valve is positioned at the front …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos