Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulbs in the Tata Indica?

Model: Tata Indica MK 1 - Years 1998-2008
Part: Headlight bulb

As we can see in this tutorial, replacing the headlight bulbs in the Tata Indica is a very quick and easy operation. To do this, we will only need a 10mm wrench. We start by opening the bonnet, then unscrew the two upper fixing bolts of the headlight and the bumper bolt, placed inside. Next, we slightly move the bumper, grab the headlight and pull it out of the bodywork. Finally, disconnect the rear connector, remove the rubber cap and extract the bulb by releasing its clip. To fit the spare, simply follow the reverse procedure.

Posted on 21 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the spark plugs on the Tata Indica?
How do you replace the spark plugs on the Tata Indica?
Tata Indica (1998-2008 / MK 1) In order to replace the spark plugs of the Tata Indica, you need to open the hood to access the components inside the engine compartment. In the fron…
How to replace the battery in the Tata Indica?
How to replace the battery in the Tata Indica?
Tata Indica (1998-2008 / MK 1) In this tutorial we can see how to replace the battery in the Tata Indica, an extremely simple and fast operation. To do this, we will only need a 10…
Where is the fuse box of the Nanny Indica
Where is the fuse box of the Nanny Indica
Tata Indica (1998-2008 / MK 1) In the following mini guide concerning the Tata Indica we will find out where exactly the fuse box is located inside the vehicle. Furthermore, for gr…

Other guides you may be interested in

How to Replace the Engine Air Filter on a Peugeot Partner

The engine air filter for this car model is located at the rear of the engine bay, directly under the windscreen, in a central position: to access the filter housing, first remove the brake fluid reservoir; then you can unscrew the three front screws that secure the filter container cover, release the side latch, and complete the removal of the cover; then extract the old filter, remove any dirt residue, ensuring no impurities enter the intake, install the new filter ensuring the seal fits perfectly against the edges of the box, and refit the cover and brake fluid reservoir.

Watch the video!


by ScegliAuto

More videos