Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in the Tata Indica

Model: Tata Indica MK 1 - Years 1998-2008
Part: Battery

In this tutorial, see how to replace the battery in the Tata Indica, a very simple and quick operation. You will only need a 10mm spanner. First, ensure the key is not in the ignition for safety, then open the bonnet, loosen the nut on the negative terminal, and disconnect it. Repeat the process for the positive terminal, unscrew the two nuts of the upper fixing bracket, and remove the battery from its housing. Finally, install the replacement by following the reverse procedure, reconnecting the positive terminal first.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter in the Tata Indica?
How to Replace the Air Filter in the Tata Indica?
Tata Indica (1998-2008 / MK 1) In this tutorial, see how to replace the air filter in the Tata Indica, a very simple and quick operation. First, open the bonnet and locate the filt…
How to Remove the Rear Light on the Tata Indica?
How to Remove the Rear Light on the Tata Indica?
Tata Indica (1998-2008 / MK 1) In this tutorial, you will see how to remove the rear light on the Tata Indica, a very simple and quick operation. First, ensure that the key is not …
How to Replace the Spark Plugs on a Tata Indica
How to Replace the Spark Plugs on a Tata Indica
Tata Indica (1998-2008 / MK 1) To replace the spark plugs on a Tata Indica, open the bonnet to access the components inside the engine bay. At the front of the engine block, locate…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos