Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Front Headlight Bulb on a Tata Nexon

Model: Tata Nexon MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Headlight bulb

Video tutorial

If you need to replace a headlight bulb on this vehicle model, you can find help in the description below and in the video. Once you open the hood, locate the headlight with the bulb to be replaced.

First, disconnect the electrical connector and remove the rubber cap behind the headlight. Under it, you will find the bulb holder and its connector, which you will detach to unlock the steel retaining clip to remove the bulb.

Take the new bulb and position it in the housing, being careful not to touch the bulb with your fingers. Then, reattach the steel clip, reconnect the electrical connector, close the rubber cap, and reconnect the power connector.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to Replace the Shift Knob on the Tata Nexon
How to Replace the Shift Knob on the Tata Nexon
Tata Nexon (2017-2024 / MK 1) To DIY replace the shift knob on your Tata Nexon, follow this procedure. First, get inside the vehicle, reach the driver's seat, and ensure that your…
How to Replace the Key Fob Battery on the Tata Nexon?
How to Replace the Key Fob Battery on the Tata Nexon?
Tata Nexon (2017-2024 / MK 1) To replace the key fob battery on the Tata Nexon, press the button on the top of the device to release the key: once the key is released, pry open th…
Where is the fuse box of the Tata Nexon located?
Where is the fuse box of the Tata Nexon located?
Tata Nexon (2017-2024 / MK 1) If you don't know where the box containing all the fuses of your Tata Nexon is located, don't worry because in the following guide you will find the …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos