Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tire with the Spare on the Tata Tigor

Model: Tata Tigor MK 1 - Years 2017-2024
Part: Wheel

Today, in this tutorial video, you will see the guide on how to remove and replace the tire with the spare on the Tata Tigor, in simple steps. First, gather all the necessary kit for the tire replacement, located in the rear compartment; then raise the vehicle with the jack and unscrew the four wheel bolts with the appropriate wrench, as shown in the video. At this point, replace the tire with the spare, hand-tightening the bolts and tightening in a crisscross pattern; finally, place the old tire in the designated compartment along with the kit!

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulb on the Tata Tigor
Replacing the Headlight Bulb on the Tata Tigor
Tata Tigor (2017-2024 / MK 1) In this short and simple guide, you will learn how to remove and replace the headlight bulb on the Tata Tigor, following the instructions below. Firs…
How to Replace the Headlight Bulb on the Tata Tigor
How to Replace the Headlight Bulb on the Tata Tigor
Tata Tigor (2017-2024 / MK 1) In this video tutorial, you will learn how to replace the headlight bulb on the Tata Tigor by following the instructions below. First, open the hood …
How to Replace the Air Filter in a Tata Tigor
How to Replace the Air Filter in a Tata Tigor
Tata Tigor (2017-2024 / MK 1) If you do not replace the air filter located in the engine compartment of your Tata Tigor, it is time to do so before dangerous overheating and subse…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos