Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil on Tata Tiago.

Model: Tata Tiago MK 1 - Years 2016-2024
Part: Engine oil

Do we want to proceed with replacing the engine oil on this car model? In the text below and in the video, we can find step-by-step instructions and procedures for carrying out the replacement. First, it is necessary to lift the car and have a container to collect the used oil after unscrewing the drain plug located under the oil pan. Then, proceed to unscrew the oil filter with the specific key and replace it with the new one after lubricating the gasket. Then, close the drain plug and proceed to fill the system after unscrewing the filling plug located above the cylinder head.

Posted on 7 June 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service of Tata Tiago
How to reset the service of Tata Tiago
Tata Tiago (2016-2024 / MK 1) The service notice for the oil change appears on the instrument panel after exceeding a certain mileage (routine maintenance); let's see the reset pr…
How to replace the oil and oil filter of the Tata Tiago
How to replace the oil and oil filter of the Tata Tiago
Tata Tiago (2016-2024 / MK 1) To change the oil and the oil filter of the Tata Tiago, we start by going under the car, unscrew the engine oil drain plug with a special wrench, let…
How to replace the front wipers of Tata Tiago.
How to replace the front wipers of Tata Tiago.
Tata Tiago (2016-2024 / MK 1) In this short and simple guide, we will see how to disassemble and replace the front wipers of the Tata Tiago, following the instructions below. Firs…

Other guides you may be interested in

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos