Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the thermostat of the Tata Bolt.

Model: Tata Bolt MK 1 - Years 2014-2019
Part: Thermostat

In this short guide, we will see the main instructions that will allow us to disassemble and replace the thermostat of the Tata Bolt. First of all, we open the hood of our car and start disconnecting the coolant hose connected to the thermostat, letting the fluid drain into a container for about ten minutes; then we unscrew the thermostat screws, in order to remove it from the engine block, as shown in the video. At this point, we install the new thermostat, connecting the sensor and the pipes; finally, we top up the coolant!

Posted on 29 June 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service on the Tata Bolt?
How to reset the service on the Tata Bolt?
Tata Bolt (2014-2019 / MK 1) The procedure for resetting the service light is the same for several Tata vehicles: Bolt, Tiago, Tigor and Zest. After having done the coupon, turn …
How to replace the cabin filter in Tata Bolt?
How to replace the cabin filter in Tata Bolt?
Tata Bolt (2014-2019 / MK 1) As we can see in this tutorial, replacing the cabin air filter, in the Tata Bolt, is a very simple and fast operation. It is located behind the panel…
How to replace the battery of the Tata Bolt key.
How to replace the battery of the Tata Bolt key.
Tata Bolt (2014-2019 / MK 1) In this new guide dedicated to all of you who own a Tata Bolt, we will discover the steps to follow in order to successfully replace the small key ba…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos