Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How does the TPMS of the Tesla Model 3 work?

Model: Tesla Model 3 MK 1 - Years 2017-2024
Part:

In this video we can see how the TPMS of the Tesla Model 3 works, which is completely automatic and integrated into the car's electronics. When the pressure of one or more tires drops below a certain threshold, a yellow warning light appears on the digital dashboard. We check the pressure by going to the vehicle screen to see the exact values of each tire. In the video, the pressure had decreased due to the cold - a normal thing in winter - so all you have to do is inflate the tire back to the recommended pressure by Tesla. Once inflated, there is nothing else to do. Tesla will automatically detect the new pressures and after a few kilometers, the yellow warning will disappear on its own. No reset procedure is needed.

Posted on 28 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tire Pressure Monitoring System (TPMS) Light on a Tesla Model 3
How to Reset the Tire Pressure Monitoring System (TPMS) Light on a Tesla Model 3
Tesla Model 3 (2017-2024 / MK 1) This guide provides instructions on how to reset the tire pressure monitoring system (TPMS) light on a Tesla Model 3; before resetting the TPMS senso…
How to reset the TPMS light on the Tesla Model 3
How to reset the TPMS light on the Tesla Model 3
Tesla Model 3 (2017-2024 / MK 1) The following video tutorial shows us how to independently reset the TPMS light on a 2020 Tesla Model 3 vehicle. To update the tire pressure, we need…
How to reset and calibrate the tire pressure of the Tesla Model 3
How to reset and calibrate the tire pressure of the Tesla Model 3
Tesla Model 3 (2017-2024 / MK 1) In this brief guide, we will see the instructions that will allow us to reset and calibrate the tire pressure sensors of the Tesla Model 3; before re…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos