Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wheel on a Tesla Model X

Model: Tesla Model X MK 1 - Years 2015-2024
Part: Wheel

In this guide, you will learn how to remove and replace the wheel and tire on a Tesla Model X, following the instructions below. First, lift the vehicle and use the kit provided for replacing the wheel with the spare; then position the kit in the designated anchoring area and raise the vehicle, as shown in the video. At this point, loosen the wheel bolts to remove the wheel and replace it with the spare; tighten the bolts in a crisscross pattern and store the replacement kit back inside the vehicle, following the video tutorial to the end!

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the tire pressure warning light on the Tesla Model X
Resetting the tire pressure warning light on the Tesla Model X
Tesla Model X (2015-2024 / MK 1) Below we will discover the procedure for resetting the tire pressure warning light of the Tesla Model X; before resetting the TPMS sensors, it is nec…
How to replace the battery of the Tesla Model X remote control
How to replace the battery of the Tesla Model X remote control
Tesla Model X (2015-2024 / MK 1) Today we will explain how to replace the battery of the remote control of the Tesla Model X car. To replace the battery, we will need to use a flat-h…
Instructions for Removing the Door Panel of a Tesla Model X
Tesla Model X (2015-2024 / MK 1) In this video, you will see the main instructions on how to remove the door panel of a Tesla Model X. First, open the door and remove the plastic tri…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos