Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. 4runner
    4. : Headlight

Toyota 4runner - Headlight

Toyota 4runner (2002-2009 / N210)
How to disassemble the front headlights on the Toyota 4Runner?
In this tutorial, we can see how to remove the front headlights in the Toyota 4Runner, a very simple and quick operation. First of all, make sure that the key …read all…
Posted on 25 October 2023 by ScegliAuto
Toyota 4runner (1996-2002 / N180)
Where are the front headlight fuses located in the Toyota 4Runner?
In case the front headlights of our Toyota 4Runner suddenly stop working and the corresponding bulbs are in good condition, we can check the status of the …read all…
Posted on 17 August 2023 by ScegliAuto
Toyota 4runner (2002-2009 / N210)
How to replace the front headlight of a Toyota 4Runner.
Today in this guide, we will see the instructions on how to disassemble and replace the front headlight of a Toyota 4Runner. First, we open the engine hood of …read all…
Posted on 13 April 2023 by ScegliAuto
Toyota 4runner (2010-2023 / N280)
How to dim the front headlights of the Toyota 4Runner
In today's video we will see how to remove the front lights and darken them in the Toyota 4Runner. Let's start by opening the front hood. We remove the plastic …read all…
Posted on 16 August 2022 by ScegliAuto
Alternator (1) Shock absorbers (1) Car stereo (5) Battery (6) Spark plugs (1) Key (7) -board computer (9) Checks and maintenance (10) Bearing (1) Brake discs (1) Headlight (4) Tail light (3) Air filter (3) Cabin air filter (5) Petrol filter (1) Light bulb (2) Headlight bulb (2) Rear light bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (1) Rear window (1) Handle (1) Engine oil (3) Front bumper (2) Brake pads (3) Instrument cluster (7) Wheel (4) Fuse box (18) Seat (1) Crankshaft RPM sensor (1) Coolant temperature sensor (1) Lock (1) Outside rearview mirror (1) Windscreen wipers (1) Interior blower (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos