Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. 4runner
  6. : Air filter

Toyota 4runner - Air filter

Air Filter Toyota 4runner (2010-2024 / n 280)

Toyota 4runner (2010-2024 / N280)
How to Replace the Air Filter in a Toyota 4Runner

To learn how to replace the engine air filter in your Toyota 4Runner (2010-2022), follow these steps. First, completely turn off the vehicle and ensure the …Read all…
Posted on 1 September 2026 by ScegliAuto
Toyota 4runner (2010-2024 / N280)
How to Replace the Air Filter in a Toyota 4Runner?

In this video, you can see how to replace the air filter in a Toyota 4Runner, a very simple and quick operation. After obtaining the correct replacement part, …Read all…
Posted on 15 August 2026 by ScegliAuto
Toyota 4runner (2010-2024 / N280)
How to Replace the Air Filter on a Toyota 4Runner

To replace the air filter on a Toyota 4Runner, open the hood and access the engine compartment, locating the filter box on the left side. By releasing the …Read all…
Posted on 9 August 2026 by ScegliAuto

Alternator (2) Shocks (1) Antenna (1) Car stereo (5) Battery (7) Spark plugs (1) Key (11) Timing belt (1) Checks and maintenance (4) Bearing (1) Brake rotors (1) Headlight (5) Tail light (3) Air filter (3) Cabin air filter (6) Fuel filter (1) Light bulb (2) Headlight bulb (2) Tail light bulb (1) Interior dome light bulb (1) Antifreeze coolant (1) Rear window (1) Handle (1) Engine oil (4) Clock (1) Door trim panel (1) Front bumper (2) Rear bumper (1) Brake pads (3) Fuel pump (1) Instrument cluster (1) Wheel (5) Fuse box (21) Seat (1) Crankshaft position sensor (1) Engine coolant temperature sensor (1) Door lock (1) Side mirror (1) Warning light – error code (10) (5) Tire pressure warning light (1) Service warning light (24) Windshield wipers (1) Blower motor (3) Steering wheel (1)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos