Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. 4runner
  6. : Light bulb

Toyota 4runner - Light bulb

Toyota 4runner (2002-2009 / N210)
How to replace the rear light bulb on the Toyota 4Runner?

In order to replace the rear light bulb of the Toyota 4Runner, you have to open the tailgate of the luggage compartment, so that the cover of the side area of …read all…
Posted on 11 August 2022 by ScegliAuto
Toyota 4runner (1996-2002 / N180)
How do I replace the light bulb on the Toyota 4Runner?

In order to replace the Toyota 4Runner bulb, you have to open the hood to access the rear part of the headlight, removing the circular plastic cover. Once this …read all…
Posted on 5 August 2022 by ScegliAuto

Alternator (1) Shock absorbers (1) Car stereo (5) Battery (6) Spark plugs (1) Key (7) -board computer (9) Checks and maintenance (10) Bearing (1) Brake discs (1) Headlight (4) Tail light (3) Air filter (3) Cabin air filter (5) Petrol filter (1) Light bulb (2) Headlight bulb (2) Rear light bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (1) Rear window (1) Handle (1) Engine oil (3) Front bumper (2) Brake pads (3) Instrument cluster (7) Wheel (4) Fuse box (18) Seat (1) Crankshaft RPM sensor (1) Coolant temperature sensor (1) Lock (1) Outside rearview mirror (1) Windscreen wipers (1) Interior blower (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos