Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. 4runner
    4. : Engine oil

Toyota 4runner - Engine oil

Toyota 4runner (2010-2023 / N280)
How to replace the oil and the oil filter on the Toyota 4Runner
To replace the oil and the oil filter of the Toyota 4Runner we start by lifting the car from the front to the right to the left; we unscrew, with a 12 socket …read all…
Posted on 7 May 2023 by ScegliAuto
Toyota 4runner (1996-2002 / N180)
How to change engine oil and oil filter in Toyota 4Runner
Below we discover the steps on how to carry out the routine maintenance coupon, replacing the engine oil and the oil filter, of the Toyota 4Runner. First of …read all…
Posted on 21 December 2022 by ScegliAuto
Toyota 4runner (2010-2023 / N280)
How to change the Toyota 4Runner Mk5 engine oil and relative filter
The guide shows how to do Toyota 4runner Mk5 engine oil change. The first step is to safely lift the front of the car to allow access to the lower part of the …read all…
Posted on 11 July 2022 by ScegliAuto
Alternator (1) Shock absorbers (1) Car stereo (5) Battery (6) Spark plugs (1) Key (7) -board computer (9) Checks and maintenance (10) Bearing (1) Brake discs (1) Headlight (4) Tail light (3) Air filter (3) Cabin air filter (5) Petrol filter (1) Light bulb (2) Headlight bulb (2) Rear light bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (1) Rear window (1) Handle (1) Engine oil (3) Front bumper (2) Brake pads (3) Instrument cluster (7) Wheel (4) Fuse box (18) Seat (1) Crankshaft RPM sensor (1) Coolant temperature sensor (1) Lock (1) Outside rearview mirror (1) Windscreen wipers (1) Interior blower (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos