Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. 4runner
    4. : Brake pads

Toyota 4runner - Brake pads

Toyota 4runner (2010-2023 / N280)
How to replace front brake pads on Toyota 4Runner [USA]
After having disassembled the wheel, locate the brake caliper and relative pads, in the rear part of the caliper assembly there are clips for fixing the …read all…
Posted on 11 October 2022 by ScegliAuto
Toyota 4runner (1996-2002 / N180)
Toyota 4Runner rear brake shoes replacement
In this video tutorial we will see how to disassemble and replace the rear brake shoes of the Toyota 4Runner. First of all we lift the car and remove the rear …read all…
Posted on 8 December 2022 by ScegliAuto
Toyota 4runner (1996-2002 / N180)
How to replace the front brake pads of Toyota 4Runner n180
The guide shows how to perform the replacement of the front brake pads of Toyota 4Runner n180. The first step is to secure the vehicle, remove the front wheel …read all…
Posted on 22 August 2022 by ScegliAuto
Alternator (1) Shock absorbers (1) Car stereo (5) Battery (6) Spark plugs (1) Key (7) -board computer (9) Checks and maintenance (10) Bearing (1) Brake discs (1) Headlight (4) Tail light (3) Air filter (3) Cabin air filter (5) Petrol filter (1) Light bulb (2) Headlight bulb (2) Rear light bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (1) Rear window (1) Handle (1) Engine oil (3) Front bumper (2) Brake pads (3) Instrument cluster (7) Wheel (4) Fuse box (18) Seat (1) Crankshaft RPM sensor (1) Coolant temperature sensor (1) Lock (1) Outside rearview mirror (1) Windscreen wipers (1) Interior blower (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos