Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. 4runner
    4. : Headlight bulb

Toyota 4runner - Headlight bulb

Toyota 4runner (2010-2023 / N280)
How to replace the headlight bulbs in Toyota 4Runner?
Replacing the Toyota 4Runner headlight bulbs is a very simple operation, in this video we can see how to proceed. After making sure that the key is not …read all…
Posted on 19 July 2022 by ScegliAuto
Toyota 4runner (2002-2009 / N210)
How to replace headlight bulbs in Toyota 4Runner
Fortunately, replacing the headlight bulb is one of the simplest and fastest do-it-yourself mechanics. Before starting to carry out the various steps, make …read all…
Posted on 21 November 2022 by ScegliAuto
Alternator (1) Shock absorbers (1) Car stereo (5) Battery (6) Spark plugs (1) Key (7) -board computer (9) Checks and maintenance (10) Bearing (1) Brake discs (1) Headlight (4) Tail light (3) Air filter (3) Cabin air filter (5) Petrol filter (1) Light bulb (2) Headlight bulb (2) Rear light bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (1) Rear window (1) Handle (1) Engine oil (3) Front bumper (2) Brake pads (3) Instrument cluster (7) Wheel (4) Fuse box (18) Seat (1) Crankshaft RPM sensor (1) Coolant temperature sensor (1) Lock (1) Outside rearview mirror (1) Windscreen wipers (1) Interior blower (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos