Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Toyota 4runner - Wheel

Toyota 4runner (2002-2009 / N210)
Where is the spare wheel located in the Toyota 4Runner?
In this video, we can see where the spare tire is located in the Toyota 4Runner and how to access it, which is obviously useful in case of a flat tire. As …read all…
Posted on 8 August 2023 by ScegliAuto
Toyota 4runner (2002-2009 / N210)
How to remove the spare tire of a Toyota 4Runner n210.
The guide shows how to disassemble the spare wheel of the Toyota 4Runner n210. The first step is to go to the trunk and take the bag with the jack from the …read all…
Posted on 29 April 2023 by ScegliAuto
Toyota 4runner (2010-2023 / N280)
How to replace the wheel of the Toyota 4Runner N280
Let's see in this short video how to remove and replace the wheel with the spare wheel of the Toyota 4Runner N 280, following these simple steps. First of all, …read all…
Posted on 4 April 2024 by ScegliAuto
Toyota 4runner (2010-2023 / N280)
How to remove the spare wheel from the Toyota 4Runner
To remove the spare wheel from your car it is advisable to leave the engine off so that you can carry out all the necessary steps safely. First go to the back …read all…
Posted on 30 March 2024 by ScegliAuto
Alternator (1) Shock absorbers (1) Car stereo (5) Battery (6) Spark plugs (1) Key (7) -board computer (9) Checks and maintenance (10) Bearing (1) Brake discs (1) Headlight (4) Tail light (3) Air filter (3) Cabin air filter (5) Petrol filter (1) Light bulb (2) Headlight bulb (2) Rear light bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (1) Rear window (1) Handle (1) Engine oil (3) Front bumper (2) Brake pads (3) Instrument cluster (7) Wheel (4) Fuse box (18) Seat (1) Crankshaft RPM sensor (1) Coolant temperature sensor (1) Lock (1) Outside rearview mirror (1) Windscreen wipers (1) Interior blower (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos