Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. 4runner
    4. : Car stereo

Toyota 4runner - Car stereo

Toyota 4runner (1996-2002 / N180)
How to replace the car radio in the Toyota 4Runner
In today's video we see how to replace the car radio in the Toyota 4Runner. First let's equip ourselves with a new device to install in our car. We then …read all…
Posted on 28 November 2022 by ScegliAuto
Toyota 4runner (2010-2023 / N280)
How to disassemble the car radio of the Toyota 4Runner n280
The guide shows how to disassemble the Toyota 4Runner n280 car radio. The first step is to remove the two plastic harnesses on the side of the center console …read all…
Posted on 8 September 2022 by ScegliAuto
Toyota 4runner (2002-2009 / N210)
How to disassemble the car radio of the Toyota 4Runner N210
Let's find out the procedure necessary for the disassembly and replacement of the stock car radio of the Toyota 4Runner N210, in simple and quick steps. First …read all…
Posted on 15 August 2022 by ScegliAuto
Toyota 4runner (2010-2023 / N280)
How to disassemble the car radio of the Toyota 4Runner
Before discovering how to properly disassemble the Toyota 4Runner car stereo, it is important to be sure that you have turned off the car engine and …read all…
Posted on 31 July 2022 by ScegliAuto
Toyota 4runner (2002-2009 / N210)
How to disassemble the car radio of the Toyota 4Runner MK4
In this short video we will see how to disassemble and replace the original Toyota 4Runner fourth series car stereo, following these simple steps. First of all …read all…
Posted on 25 June 2022 by ScegliAuto
Alternator (1) Shock absorbers (1) Car stereo (5) Battery (6) Spark plugs (1) Key (7) -board computer (9) Checks and maintenance (10) Bearing (1) Brake discs (1) Headlight (4) Tail light (3) Air filter (3) Cabin air filter (5) Petrol filter (1) Light bulb (2) Headlight bulb (2) Rear light bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (1) Rear window (1) Handle (1) Engine oil (3) Front bumper (2) Brake pads (3) Instrument cluster (7) Wheel (4) Fuse box (18) Seat (1) Crankshaft RPM sensor (1) Coolant temperature sensor (1) Lock (1) Outside rearview mirror (1) Windscreen wipers (1) Interior blower (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos