Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from the Toyota 4Runner N210

Model: Toyota 4runner N210 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Car stereo

See other generations:
Video tutorial

Let's discover the procedure for removing and replacing the factory radio of the Toyota 4Runner N210 in simple and quick steps. First, get inside the vehicle and start by removing part of the center console by lifting and detaching the plastic upwards; then disconnect the electrical cables located underneath.

At this point, use a socket wrench to remove the screws from the center instrument panel and the climate control switches; pull them forward and also remove the radio by disconnecting the electrical connectors found on the back!


Updated on 8 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wheel Bearing on Toyota 4Runner N210
How to Replace the Front Wheel Bearing on Toyota 4Runner N210
Toyota 4runner (2002-2009 / N210) In this video, you will see how to disassemble and replace the front wheel bearing on a Toyota 4Runner N210 by following these simple steps. First, l…
How to Remove the Spare Tire on the Toyota 4Runner N210
How to Remove the Spare Tire on the Toyota 4Runner N210
Toyota 4runner (2002-2009 / N210) This guide shows how to remove the spare tire on the Toyota 4Runner N210. The first step is to go to the trunk and retrieve the bag with the jack fro…
How to Replace the Remote Battery of the Toyota 4Runner N210
How to Replace the Remote Battery of the Toyota 4Runner N210
Toyota 4runner (2002-2009 / N210) In this video tutorial, you will see how to disassemble and replace the battery of the remote key for the Toyota 4Runner N210 in simple and quick ste…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos