Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wheel Bearing on Toyota 4Runner N210

Model: Toyota 4runner N210 - Years 2002-2009
Part: Bearing

In this video, you will see how to disassemble and replace the front wheel bearing on a Toyota 4Runner N210 by following these simple steps. First, lift the vehicle and remove the front wheel; then unscrew the rear bolts of the brake caliper using a socket wrench. At this point, separate the axle from the control arm by removing the pins; now remove the brake rotor and unscrew the center nut of the bearing. Finally, remove the old bearing and replace it with a new one, following the video until the end for reassembly!

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Spare Tire on the Toyota 4Runner N210
How to Remove the Spare Tire on the Toyota 4Runner N210
Toyota 4runner (2002-2009 / N210) This guide shows how to remove the spare tire on the Toyota 4Runner N210. The first step is to go to the trunk and retrieve the bag with the jack fro…
How to Remove the Radio from the Toyota 4Runner N210
How to Remove the Radio from the Toyota 4Runner N210
Toyota 4runner (2002-2009 / N210) Let's discover the procedure for removing and replacing the factory radio of the Toyota 4Runner N210 in simple and quick steps. First, get inside the…
How to Replace the Crankshaft Position Sensor on the Toyota 4Runner N210
How to Replace the Crankshaft Position Sensor on the Toyota 4Runner N210
Toyota 4runner (2002-2009 / N210) In this video tutorial, you will learn how to remove and replace the crankshaft position sensor or RPM sensor on the Toyota 4Runner N210. First, open…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos