Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the Toyota 4Runner N210

Model: Toyota 4runner N210 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Key

See other generations:
Video tutorial

In this video tutorial, you will see how to disassemble and replace the battery of the remote key for the Toyota 4Runner N210 in simple and quick steps. First, take your remote and start prying at the sides using something thin like a flat screwdriver to open it into two parts; this will give you access to the circuit board and the battery, as shown in the video.

At this point, replace the battery with a new one of the correct type (in this case, a CR2016 3V); insert it in the correct orientation and securely close the remote, aligning the two halves.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Replace the Crankshaft Position Sensor on the Toyota 4Runner N210
How to Replace the Crankshaft Position Sensor on the Toyota 4Runner N210
Toyota 4runner (2002-2009 / N210) In this video tutorial, you will learn how to remove and replace the crankshaft position sensor or RPM sensor on the Toyota 4Runner N210. First, open…
How to Remove the Radio from the Toyota 4Runner N210
How to Remove the Radio from the Toyota 4Runner N210
Toyota 4runner (2002-2009 / N210) Let's discover the procedure for removing and replacing the factory radio of the Toyota 4Runner N210 in simple and quick steps. First, get inside the…
How to Replace the Front Wheel Bearing on Toyota 4Runner N210
How to Replace the Front Wheel Bearing on Toyota 4Runner N210
Toyota 4runner (2002-2009 / N210) In this video, you will see how to disassemble and replace the front wheel bearing on a Toyota 4Runner N210 by following these simple steps. First, l…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos