Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Spare Tire on the Toyota 4Runner N210

Model: Toyota 4runner N210 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Wheel

See other generations:
Video tutorial

This guide shows how to remove the spare tire on the Toyota 4Runner N210. The first step is to go to the trunk and retrieve the bag with the jack from the compartment on the left side of the vehicle. Next, assemble the tool to operate the small winch that holds the spare tire.

Insert this element into the hole on the side of the lock block and turn it until the tire lowers from the bottom of the vehicle to the ground. Remove the tire lock from the center of the wheel rim. The operation is now complete.

To secure the tire, proceed in reverse.


Updated on 24 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wheel Bearing on Toyota 4Runner N210
How to Replace the Front Wheel Bearing on Toyota 4Runner N210
Toyota 4runner (2002-2009 / N210) In this video, you will see how to disassemble and replace the front wheel bearing on a Toyota 4Runner N210 by following these simple steps. First, l…
Where is the Spare Tire Located in the Toyota 4Runner?
Where is the Spare Tire Located in the Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) In this video, you can see where the spare tire is located in the Toyota 4Runner and how to access it, useful in case of a flat. As shown, the tire i…
How to Replace the Wheel on the Toyota 4Runner N280
How to Replace the Wheel on the Toyota 4Runner N280
Toyota 4runner (2010-2024 / N280) In this short video, see how to remove and replace the wheel with the spare on the Toyota 4Runner N280 by following these simple steps. First, open t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos