Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Toyota 4Runner MK4

Model: Toyota 4runner N210 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Car stereo

See other generations:
Video tutorial

In this short video, you will learn how to remove and replace the original radio of the fourth generation Toyota 4Runner by following these simple steps. First, get inside the vehicle and remove the lower cover of the center console; then, unscrew the screws located underneath, as shown in the video.

Next, remove the climate control knobs to access the screws of the radio; now, unscrew these to remove the radio, disconnecting the electrical connectors located on the back. For reassembly, simply reverse the procedure!


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Toyota 4Runner N280
How to Remove the Radio from a Toyota 4Runner N280
Toyota 4runner (2010-2024 / N280) This guide shows how to remove the radio from a Toyota 4Runner N280. The first step is to remove the two plastic trim pieces on the side of the cente…
How to Replace the Radio in a Toyota 4Runner
How to Replace the Radio in a Toyota 4Runner
Toyota 4runner (1996-2002 / N180) In today's video, learn how to replace the radio in a Toyota 4Runner. First, gather a new device to install in your vehicle. Next, detach the dashboa…
Where are the fuses located in the Toyota 4Runner?
Where are the fuses located in the Toyota 4Runner?
Toyota 4runner (2010-2024 / N280) The fuses in the Toyota 4Runner are located inside the designated fuse boxes within the vehicle. The first is positioned inside the cabin, on the low…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos