Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Toyota 4Runner N280

Model: Toyota 4runner N280 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Car stereo

See other generations:
Video tutorial

This guide shows how to remove the radio from a Toyota 4Runner N280. The first step is to remove the two plastic trim pieces on the side of the center console using a trim tool. At this point, you can remove the air conditioning module and disconnect its electrical connectors.

Remove the two 10 mm bolts and pull out the radio assembly starting from the bottom of the unit. Be careful not to pull too hard as you risk damaging the electrical connectors.

Once the electrical cables are disconnected, you can completely remove the audio unit.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Replace the Wheel on the Toyota 4Runner N280
How to Replace the Wheel on the Toyota 4Runner N280
Toyota 4runner (2010-2024 / N280) In this short video, see how to remove and replace the wheel with the spare on the Toyota 4Runner N280 by following these simple steps. First, open t…
How to Remove the Radio from the Toyota 4Runner
How to Remove the Radio from the Toyota 4Runner
Toyota 4runner (2010-2024 / N280) Before discovering how to properly remove the radio from the Toyota 4Runner, ensure that the vehicle's engine is off and the battery is disconnected.…
Where are the fuses located in the Toyota 4Runner?
Where are the fuses located in the Toyota 4Runner?
Toyota 4runner (2010-2024 / N280) The fuses in the Toyota 4Runner are located inside the designated fuse boxes within the vehicle. The first is positioned inside the cabin, on the low…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos