Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in a Toyota 4Runner

Model: Toyota 4runner N180 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Car stereo

See other generations:
Video tutorial

In today's video, learn how to replace the radio in a Toyota 4Runner. First, gather a new device to install in your vehicle.

Next, detach the dashboard. Remove the glove compartment as well, then pull out the plastic console from its slot.

At this point, extract the old radio and disconnect the power connectors and antenna. Then, insert the new unit, using the same positions as the previous device.

Test its functionality, and if everything is okay, proceed with the complete reassembly.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Toyota 4Runner N280
How to Remove the Radio from a Toyota 4Runner N280
Toyota 4runner (2010-2024 / N280) This guide shows how to remove the radio from a Toyota 4Runner N280. The first step is to remove the two plastic trim pieces on the side of the cente…
Where are the fuses located in the Toyota 4Runner?
Where are the fuses located in the Toyota 4Runner?
Toyota 4runner (2010-2024 / N280) The fuses in the Toyota 4Runner are located inside the designated fuse boxes within the vehicle. The first is positioned inside the cabin, on the low…
How to Remove the Radio from the Toyota 4Runner N210
How to Remove the Radio from the Toyota 4Runner N210
Toyota 4runner (2002-2009 / N210) Let's discover the procedure for removing and replacing the factory radio of the Toyota 4Runner N210 in simple and quick steps. First, get inside the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos