Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs in a Toyota 4Runner?

Model: Toyota 4runner N280 - Years 2010-2024
Part: Headlight bulb

Replacing the headlight bulbs in a Toyota 4Runner is a very simple task. First, ensure the key is not in the ignition. Open the hood, locate the large cap at the back of the headlight, and remove it. To take out the bulb, simply rotate the socket counterclockwise about 45 degrees. Disconnect the connector and install the replacement, an H11, by reversing the procedure. It is important not to touch the glass of the bulb with bare hands, as organic residues can cause overheating and premature failure.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight in a Toyota 4Runner
How to Replace the Headlight in a Toyota 4Runner
Toyota 4runner (2002-2009 / N210) Today, let's look at the instructions on how to remove and replace the front headlight in a Toyota 4Runner. First, open the hood of your vehicle and …
How to Remove the Rear Headlight of the Toyota 4Runner?
How to Remove the Rear Headlight of the Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) To remove the rear headlight of the Toyota 4Runner, open the trunk to access the components inside. On the side wall corresponding to the headlight, …
How to Replace the Headlight Bulb on a Toyota 4Runner
How to Replace the Headlight Bulb on a Toyota 4Runner
Toyota 4runner (1996-2002 / N180) To replace the headlight bulb on a Toyota 4Runner, open the hood to access the back of the headlight by removing the circular plastic cover. Once thi…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos