Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Headlight of the Toyota 4Runner?

Model: Toyota 4runner N210 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Tail light

See other generations:
Video tutorial

To remove the rear headlight of the Toyota 4Runner, open the trunk to access the components inside. On the side wall corresponding to the headlight, detach the panel and loosen the bolts underneath that secure the headlight from the inside.

Once these bolts are loosened, pull the headlight out of its housing to disconnect the connector at the back. After removing the connector, connect the new headlight and secure it with the internal screws.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Headlight on a Toyota 4Runner?
How to Replace the Rear Headlight on a Toyota 4Runner?
Toyota 4runner (2010-2024 / N280) Replacing the rear headlight on a Toyota 4Runner is a very simple and quick task. Let's see how to proceed in this tutorial. Start by opening the tru…
How to Replace the Rear Shock Absorber on a Toyota 4Runner?
How to Replace the Rear Shock Absorber on a Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) To replace the rear shock absorber on a Toyota 4Runner, lift the vehicle to access the bolts securing the corresponding rear wheel, then remove the w…
How to Replace the Rear Light Bulb in a Toyota 4Runner (1996-2002)
How to Replace the Rear Light Bulb in a Toyota 4Runner (1996-2002)
Toyota 4runner (1996-2002 / N180) Let's discover the procedure necessary to replace the rear light bulbs in a Toyota 4Runner from 1996 to 2002 by following these simple steps. First, …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos