Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight on a Toyota 4Runner?

Model: Toyota 4runner N280 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Tail light

See other generations:
Video tutorial

Replacing the rear headlight on a Toyota 4Runner is a very simple and quick task. Let's see how to proceed in this tutorial.

Start by opening the trunk and then open the access panel located at the back of the headlight to be replaced. Use a plastic trim tool or a flathead screwdriver, being careful not to damage the interior.

Once done, remove the two nuts with a 10mm socket wrench and pull the headlight out of the body by pulling it outward. Finally, disconnect the connector and proceed with installing the replacement by simply following the reverse procedure.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Headlight of the Toyota 4Runner?
How to Remove the Rear Headlight of the Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) To remove the rear headlight of the Toyota 4Runner, open the trunk to access the components inside. On the side wall corresponding to the headlight, …
How to Replace the Headlight Bulb on a Toyota 4Runner
How to Replace the Headlight Bulb on a Toyota 4Runner
Toyota 4runner (1996-2002 / N180) To replace the headlight bulb on a Toyota 4Runner, open the hood to access the back of the headlight by removing the circular plastic cover. Once thi…
How to Replace the Headlight in a Toyota 4Runner
How to Replace the Headlight in a Toyota 4Runner
Toyota 4runner (2002-2009 / N210) Today, let's look at the instructions on how to remove and replace the front headlight in a Toyota 4Runner. First, open the hood of your vehicle and …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos