Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Toyota 4Runner

Model: Toyota 4runner N180 - Years 1996-2002
Part: Light bulb

To replace the headlight bulb on a Toyota 4Runner, open the hood to access the back of the headlight by removing the circular plastic cover. Once this cover is removed, pull the headlight out from its housing and disconnect it from its connector. Connect the new bulb to the connector, then insert it back into the headlight housing. After the bulb is installed, close the back of the headlight with the circular cover.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on a Toyota 4Runner
How to Replace the Rear Light Bulb on a Toyota 4Runner
Toyota 4runner (2002-2009 / N210) To replace the rear light bulb on a Toyota 4Runner, open the trunk door to detach the cover from the side of the trunk. Once this is removed, you can…
How to Replace the Interior Dome Light Bulb for the Toyota 4Runner
How to Replace the Interior Dome Light Bulb for the Toyota 4Runner
Toyota 4runner (2010-2024 / N280) In this video tutorial, you will learn how to remove and replace the dome light bulb and other interior lights in the Toyota 4Runner. First, get insi…
Where to Find the Fuse Box in the Toyota 4Runner
Where to Find the Fuse Box in the Toyota 4Runner
Toyota 4runner (2002-2009 / N210) If you are experiencing issues with one or more electrical components in your Toyota 4Runner, don't worry because you can directly address them throu…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos