Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Dome Light Bulb for the Toyota 4Runner

Model: Toyota 4runner N280 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Interior dome light bulb

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the dome light bulb and other interior lights in the Toyota 4Runner. First, get inside the vehicle and start by removing the light's dome cover, prying at the edges of the plastic with something thin.

Then, use pliers to pull out the old bulb, as shown in the video. At this point, install the new bulbs (in this case, LED type); then reassemble everything and replace the other bulbs, following the video tutorial to the end!


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Toyota 4Runner
How to Replace the Rear Light Bulb on a Toyota 4Runner
Toyota 4runner (2002-2009 / N210) To replace the rear light bulb on a Toyota 4Runner, open the trunk door to detach the cover from the side of the trunk. Once this is removed, you can…
How to Replace the Headlight Bulb on a Toyota 4Runner
How to Replace the Headlight Bulb on a Toyota 4Runner
Toyota 4runner (1996-2002 / N180) To replace the headlight bulb on a Toyota 4Runner, open the hood to access the back of the headlight by removing the circular plastic cover. Once thi…
How to Replace the Interior Door Handle of the Toyota 4Runner N210
How to Replace the Interior Door Handle of the Toyota 4Runner N210
Toyota 4runner (2002-2009 / N210) This guide shows how to replace the interior door handle of the Toyota 4Runner N210. The first step is to remove the mirror finish panel and the plas…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos