Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Shoes on a Toyota 4Runner

Model: Toyota 4runner N180 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Brake pads

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the rear brake shoes on a Toyota 4Runner. First, lift the vehicle and remove the rear wheel; then, remove the drum by unscrewing the screws in the holes to extract it, as shown in the video.

Next, detach the brake shoe spring using pliers; now unscrew the nuts and detach the pin, removing the old brake shoes. Clean the brake assembly from dirt and install the new high-quality shoes, following the video tutorial to the end!


Updated on 11 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Rotors on a Toyota 4Runner
How to Replace the Front Brake Rotors on a Toyota 4Runner
Toyota 4runner (2002-2009 / N210) This guide provides step-by-step instructions to remove and replace the front brake rotors and pads on a Toyota 4Runner. First, lift the vehicle and …
How to Replace the Front Brake Pads on the Toyota 4Runner N180
How to Replace the Front Brake Pads on the Toyota 4Runner N180
Toyota 4runner (1996-2002 / N180) This guide shows how to replace the front brake pads on the Toyota 4Runner N180. The first step is to secure the vehicle, remove the front wheel, and…
How to Replace the Front Brake Pads on a Toyota 4Runner [USA]
How to Replace the Front Brake Pads on a Toyota 4Runner [USA]
Toyota 4runner (2010-2024 / N280) After removing the wheel, locate the brake caliper and its pads. At the back of the caliper assembly, there are clips securing the threaded rods. Dis…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos