Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Rotors on a Toyota 4Runner

Model: Toyota 4runner N210 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Brake rotors

See other generations:
Video tutorial

This guide provides step-by-step instructions to remove and replace the front brake rotors and pads on a Toyota 4Runner. First, lift the vehicle and remove the front wheel; then, loosen the bolts securing the brake caliper to remove it, as shown in the video.

Next, remove the old brake pads and then unscrew the rotor bolts to take it off, replacing it with the new one. Now, install the new brake pads inside the brake caliper, reassembling everything by following the video tutorial to the end!


Updated on 13 May 2026 by ScegliAuto


Related tutorials

Where are the front headlight fuses located in the Toyota 4Runner?
Toyota 4runner (1996-2002 / N180) If the front headlights of your Toyota 4Runner suddenly stop working and the bulbs are in good condition, check the status of the respective fuses, w…
Where Are the Fuses Located in the Toyota 4Runner?
Where Are the Fuses Located in the Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) In the Toyota 4Runner, the fuses are divided between two fuse boxes located inside the vehicle. The first box is positioned in the cabin, on the lowe…
How to Remove the Headlights in the Toyota 4Runner?
How to Remove the Headlights in the Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) In this tutorial, you will learn how to remove the headlights in the Toyota 4Runner, a very simple and quick operation. First, ensure the key is not …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos