Do it yourself
| ||||
|
Toyota Prius - Video tutorial
Model: Toyota Prius
Xw30, MK 2
- Years 2009-2015 The replacement of the rear brake disc of the Toyota Prius mk2 model is very simple. We start the replacement by lifting the car on a scaffold and removing the right rear wheel, once the wheel is removed we unscrew the support bracket bolt using the NR14 wrench. Then we only partially lift the brake caliper and remove the used pads. To remove the brake disc we use 2 M8 bolts. We screw them in turn until the disc cannot be removed. Once the worn disc is removed, we insert the new one and mount it following the procedure carried out to remove it but in reverse. We finish by mounting the wheel back on.
Posted on 21 March 2024 by ScegliAuto
Other guides that may interest you
|
How to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.036
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |