Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on a Toyota 4Runner

Model: Toyota 4runner N180 - Years 1996-2002
Part: Engine oil

Below are the steps to perform routine maintenance by replacing the engine oil and oil filter on a Toyota 4Runner. First, lift the vehicle and begin draining the old engine oil into a container for about ten minutes; then use the appropriate wrench to unscrew the oil filter cartridge, replacing it with a new one, as shown in the video. Finally, open the hood and pour in the new oil, ensuring it has the correct viscosity; to verify the type of oil, consult your owner's manual!

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change Engine Oil and Oil Filter on a Toyota 4Runner
How to Change Engine Oil and Oil Filter on a Toyota 4Runner
Toyota 4runner (2010-2024 / N280) Let's discover the steps that will allow us to perform routine maintenance by changing the engine oil and oil filter on a Toyota 4Runner. First, lift…
How to Change Engine Oil and Filter on Toyota 4Runner Mk5
How to Change Engine Oil and Filter on Toyota 4Runner Mk5
Toyota 4runner (2010-2024 / N280) This guide shows how to replace the engine oil on the Toyota 4Runner Mk5. The first step is to safely lift the front of the vehicle to access the und…
How to Change the Oil and Oil Filter on the Toyota 4Runner
How to Change the Oil and Oil Filter on the Toyota 4Runner
Toyota 4runner (2010-2024 / N280) To change the oil and oil filter on the Toyota 4Runner, start by raising the front of the vehicle on the right side; remove the front skid plate usin…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos