Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on the 2014 Toyota RAV4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure warning light on the 2014 Toyota RAV4, first check the tyre pressures and inflate them according to the manufacturer's instructions. Only after this can you proceed with the reset.

To perform the reset, get in the vehicle, turn on the ignition, and press the RESET button located on the lower part of the dashboard on the driver's side, just below the steering wheel. Hold the button for 5 seconds before turning off the ignition.

After that, turn the ignition back on and check that the reset was successful.


Updated on 19 October 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on a Toyota RAV4
How to Reset the Tyre Pressure Warning Light on a Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In this short and simple guide, you will learn how to reset the tyre pressure warning light (TPMS) on a Toyota RAV4. Initially, when you turn on the …
How to Reset the TPMS Light on a 2010 Toyota RAV4
How to Reset the TPMS Light on a 2010 Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To reset the TPMS light, which relates to tyre pressure, you must check and adjust the pressure of all four tyres. After completing this initial step…
How to Reset the TPMS Light on a Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Today, you will learn how to reset the TPMS light on a Toyota RAV4. The steps to follow are very simple and quick. The first step is to turn on the i…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos