Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Service Light on a Toyota C-HR

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Warning light – error code

See other generations:
Video tutorial

In this brief guide, you will see the entire procedure necessary to reset the service light on a Toyota C-HR, first series model produced from 2016 to 2023. Start by turning on the vehicle's instrument cluster without starting the engine. Then, press the "TRIP" button located on the right side of the steering wheel until you see "TRIP A" on the information display, then turn off the ignition.

Next, press and hold the "TRIP" button and turn the ignition back on without starting the engine. Finally, wait with the "TRIP" button still pressed until the reset is complete.


Updated on 19 October 2026 by ScegliAuto


Related tutorials

Inspection Reset on a Toyota C-HR
Inspection Reset on a Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Resetting the inspection light on a first-generation Toyota C-HR is a very simple and quick operation, and thanks to today's video tutorial, you will…
Resetting the service light on the Toyota C-HR MK2
Resetting the service light on the Toyota C-HR MK2
Toyota C Hr (2023-2026 / MK 2) When you are about to reach the mileage for the engine oil change on the Toyota C-HR MK2, a warning appears on the dashboard to remind you to perform…
How to reset the Service light on the Toyota C-HR?
How to reset the Service light on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) To reset the Service light on the Toyota C-HR, turn on the instrument cluster and press the TRIP button located on the right spoke of the steering wh…

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos