Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service light on the Toyota C-HR MK2

Model: Toyota C Hr MK 2 - Years: 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

When you are about to reach the mileage for the engine oil change on the Toyota C-HR MK2, a warning appears on the dashboard to remind you to perform the operation. After completing the task, you need to reset the system that triggers the notification.

While seated in the driver's seat, turn the key to switch on the instrumentation, then use the "trip" button located on the right side of the steering wheel to select "trip A" on the display. Turn off the ignition, press and hold the "trip" button, turn the ignition key to position two, wait a few seconds, and release the button to complete the reset.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Maintenance Indicator on Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) This guide explains how to reset the tyre maintenance indicator on a Toyota C-HR. It's a very simple operation: enter the vehicle, turn on the instru…
Maintaining the Battery Filter on Toyota CHR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Go under the right rear seat. Remove the clip by unscrewing it with a screwdriver and then take off the fixed plastic cover. Clean the now-exposed fa…
How to Replace the Remote Battery of a Toyota CHR?
How to Replace the Remote Battery of a Toyota CHR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) This short video tutorial shows how to change the battery of the key remote for a Toyota CHR. The operation is very simple and requires no tools. Tak…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos