Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulbs in the Toyota Auris?

Model: Toyota Auris E180 - Years 2012-2018
Part: Headlight bulb

In this tutorial we can see how to replace the front headlight bulbs in the Toyota Auris, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the hood and, as for the driver's side, remove the cap of the windshield washer tank. Next, open the large cap located on the back of the headlight, disconnect the power connector and remove the old bulb by rotating it slightly counterclockwise. At this point, we can insert the replacement, follow the reverse procedure and repeat the operation on the opposite side.

Posted on 25 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlight Bulbs on a Toyota Auris
Replacing the Front Headlight Bulbs on a Toyota Auris
Toyota Auris (2007-2012 / E150) Need to replace the front headlight bulbs on a Toyota Auris? Here’s how to proceed. Open the front bonnet by pulling the lever located at the bottom …
How to Replace the Headlight Bulbs on a Toyota Auris
How to Replace the Headlight Bulbs on a Toyota Auris
Toyota Auris (2007-2012 / E150) Let's replace the front headlight bulbs on a Toyota Auris. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secu…
Replacement of the front headlight of the Toyota Auris
Replacement of the front headlight of the Toyota Auris
Toyota Auris (2007-2012 / E150) Today's instructions will allow us to dismantle and replace the front headlight of the Toyota Auris. First, we open the hood of the car and start dis…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos