Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the tire pressure of the Toyota Yaris

Model: Toyota Yaris Xp130 - Years 2011-2019
Part:

The Toyota Yaris is equipped with sensors on the tire rims that monitor the pressure. When these sensors detect a variation from the set value, they indicate it by lighting up an orange-colored tire section-shaped warning light. With the help of a compressor and a pressure gauge, we check and, if necessary, restore the correct values, after which we reset the control system. We sit in the driver's seat and turn on the instrument panel, then move under the dashboard, just above the clutch pedal we will find a button, press it and hold it down until the orange light goes off.

Posted on 27 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on the Toyota Yaris?
How to Reset the Tyre Pressure Light on the Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) To reset the tyre pressure light on the Toyota Yaris, first inflate the tyres to the correct pressure, which is indicated on the sticker attached to …
How to reset the tire pressure light on the Toyota Yaris
How to reset the tire pressure light on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) In this article today, we will show you how to reset the tire pressure light on the Toyota Yaris. For this operation, no tools or software are needed…
How to Reset the Tyre Pressure Light on a Toyota Yaris Hybrid?
How to Reset the Tyre Pressure Light on a Toyota Yaris Hybrid?
Toyota Yaris (2020-2026 / MK 4) The car model mentioned, the Toyota Yaris Hybrid, follows the method described below to cancel the tyre pressure warning light: after turning on the …

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2020-2027 - What to do in case of tire warning light on Toyota Yaris? Read answer

How to Open the Fuel Filler Flap on a Hyundai i20?

In this tutorial, you will see how to open the fuel filler flap on a Hyundai i20, a very simple operation similar to that of many vehicles. First, go inside the cabin; it is not necessary to insert the key or unlock all the locks, then locate and operate the lever situated in the lower left area of the cabin, right next to the driver's seat. Once done, exit the vehicle, fully open the flap, and unscrew the fuel cap. To close the flap, simply press it gently until you hear a click.

Watch the video!


by ScegliAuto

More videos