Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Toyota RAV4

Model: Toyota Rav 4 MK 4, Xa40 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

Video tutorial

The process of disassembling and replacing the headlight bulb is really very simple; let's see how to perform the operation on the Toyota RAV 4. First of all, open the hood of the car and start removing the plastic cap protecting the bulbs; then disconnect the electrical connector to remove the bulb holder and the low beam bulb, replacing it with the new one (having the same attachment), as shown in the video.

At this point, replace and install the new low beam bulb, also replacing the position lights if necessary.


Posted on 30 August 2024 by ScegliAuto


Related tutorials

How to replace the headlight bulb of the Toyota RAV4
How to replace the headlight bulb of the Toyota RAV4
Toyota Rav 4 (2000-2006 / MK 2, Xa20) To correctly replace the headlight bulb of your second generation Toyota RAV4, you need to follow the steps described in this new mini guide. First o…
How to replace the headlight bulb of the Toyota RAV4
How to replace the headlight bulb of the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Below we will see the information that will allow us to disassemble and replace the headlight bulb of the Toyota RAV4. First, we open the hood of the…
How to Remove the Headlight Bulbs on a Toyota Rav4
How to Remove the Headlight Bulbs on a Toyota Rav4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and s…

Other guides you may be interested in

How to Remove the Headrest from an Opel Astra

Today's steps will show you how to remove the front headrest from an Opel Astra; this procedure also applies to all other headrests in the seats. So, get in the vehicle and start by rotating the plastic clips found at the base of the headrest; then remove the rear padding of the front seat and disconnect the headrest cable, as shown in the video. At this point, pull the headrest upwards to remove it, replacing it with a new one if necessary; apply the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos