Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Interior Light Bulbs in a Toyota Yaris?

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Interior dome light bulb

See other generations:
Video tutorial

In this tutorial, see how to replace the interior light bulbs in a Toyota Yaris, a very simple and quick operation. First, ensure that the key is not inserted.

Then, using a flat-head screwdriver or preferably a plastic spatula, lever along the central slot of the light unit to disengage the two covers. Next, grasp the bulb, pull it towards you, and remove it from the housing.

At this point, insert the replacement, avoiding direct contact with the glass, and reassemble everything.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

Toyota Yaris (2005-2011 / Xp90) These brief steps will show you how to dismantle and replace the number plate bulbs on the Toyota Yaris, following the instructions below. First, mov…
Toyota Yaris (1999-2005 / Xp10) In this short and simple guide, you will learn how to remove and replace the interior light and its bulb in the Toyota Yaris. First, get into the veh…
Toyota Yaris (1999-2005 / Xp10) This brief and simple guide outlines the steps to remove and replace the bulb in the interior dome light of a Toyota Yaris. First, get inside the veh…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Guide to replacing the 12V battery on the Toyota Yaris Cross

Today, we will go through the main instructions to remove and replace the 12V battery on the Toyota Yaris Cross. First, open the right rear door of the vehicle and start by removing the plastic cover located under the seat in the corner. You will find the battery inside, where you will disconnect both battery terminals (positive and negative), as shown in the video. Now, remove and replace the battery with a new one of the correct type and the same amperage; then, reinstall the battery and finally the plastic cover.

Watch the video!


by ScegliAuto

More videos