Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Airbag in the Toyota Yaris GR?

Model: Toyota Yaris MK 4 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Airbag

See other generations:
Video tutorial

In this tutorial, you will learn how to remove the steering wheel airbag in the Toyota Yaris GR, a very simple and quick operation. First, open the bonnet, then disconnect the negative terminal of the battery to prevent accidental airbag deployment.

Next, locate the two holes on either side of the steering column, insert a small flat-head screwdriver into them, and leverage to release the retaining clips. At this point, you can separate the airbag from the steering wheel, disconnect the connector, and install the replacement by following the reverse procedure.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to Remove the Airbag from the Toyota Yaris Steering Wheel
How to Remove the Airbag from the Toyota Yaris Steering Wheel
Toyota Yaris (2005-2011 / Xp90) To remove the airbag from the steering wheel of the Toyota Yaris, follow these steps: locate the two screws on either side of the steering wheel at t…
How to Remove the Steering Wheel Airbag in a Toyota Yaris?
How to Remove the Steering Wheel Airbag in a Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) In this tutorial, see how to remove the steering wheel airbag in a Toyota Yaris, a very simple and quick operation. Before proceeding, open the bonne…
How to remove the steering wheel airbag of the Toyota Yaris
How to remove the steering wheel airbag of the Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) These short and simple instructions will guide us through the process of disassembling and replacing the steering wheel airbag of the Toyota Yaris. F…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos