|
Do it yourself
| |||
| ||||
How to replace the emergency lights switch on the Toyota Aygo
Model: Toyota Aygo
Ab40, MK 2
- Years 2014-2023
In this video we see how to change the emergency lights switch on the Toyota Aygo: the procedure is the same also for the Peugeot 107 and Citroen C1. We start by removing the fan knob; we will need a plastic spatula, with which we will pry in order to remove the knob from its housing. We have uncovered a cross screw, which we unscrew. Now with the spatula, we pry on the sides of the dashboard, in order to lift the frame, starting from the bottom. In this way the unit will come off its housing. In the meantime, we will have obtained the button, maybe on Amazon with the code B0CQC95BPN at the price of 9.98 euros, free delivery for Prime customers. From the back, we remove the electrical connector of the button we intend to replace, we remove the base (the new button has its own) and insert the new one in its place. We connect the electrical connector. We reassemble the unit in its place, pressing on the four clips, put back the central screw and then the fan knob. Done!
Posted on 6 December 2024 by ScegliAuto
Video tutorial
Related tutorials
Toyota Aygo
(2005-2014 /
MK 1, Ab10)
This guide shows how to replace the bulbs on a Toyota Aygo, specifically the H4 dipped beam bulbs. To carry out the replacement, open the bonnet afte…
Toyota Aygo
(2005-2014 /
MK 1, Ab10)
The fuses on the Toyota Aygo are located inside the designated fuse boxes within the vehicle: there are two in this case, one inside the cabin and on…
Toyota Aygo
(2005-2014 /
MK 1, Ab10)
All the fuses on the Toyota Aygo are divided within the appropriate fuse boxes installed in the car: in this vehicle model, you can find two fuse box…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.070
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |