Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Tire pressure reset on a Toyota Corolla

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

Today we will see how to reset the tire pressure warning light on a fourth generation Toyota Corolla. Performing this operation is very simple, but before doing so we must verify the correct pressure of all tires as indicated by the manufacturer, but let's see now how to proceed.

Let's start by starting the vehicle, then we open the glove compartment on the passenger side and press and hold the reset button located to its left as shown in the video. Once done, we will see the tire pressure warning light start flashing, so we continue to hold down the reset button until it disappears to complete the job.


Posted on 24 December 2024 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a Toyota Corolla
How to Reset the Tyre Pressure Light on a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) To reset the tyre pressure light on a Toyota Corolla, start by turning on the ignition. Next, use the buttons on the steering wheel to navigate throu…
Reset tire pressure warning on the Toyota Corolla
Reset tire pressure warning on the Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Today we will see the procedure and instructions for resetting the tire pressure warning of the Toyota Corolla; before resetting the TPMS sensors, it…
How to Reset the Tyre Pressure Warning Light on a Toyota Corolla
How to Reset the Tyre Pressure Warning Light on a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Before you begin, sit in the driver's seat of your Toyota Corolla. Insert the key into the ignition and turn it to the first position to activate the…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos