|
Do it yourself
| |||
| ||||
How to clean the fan and traction battery filter of a Toyota Auris
Model: Toyota Auris
E180
- Years 2012-2018
In this video, we see how to clean the filter and fan of the traction battery of the Toyota Auris: these components are located under the rear seat. We must remove the part behind the driver's seat, levering it out, and then remove the two clips located on the rear floor, just below the seat we removed; then we must remove the door sill from the same side. Under the bench, we find two more clips that we must remove to access the fan, by removing the bench support part. Inside, we find the filter on one side and the fan on the other. The fan is cleaned with damp wipes, a plastic knife, and a little patience. For the filter, simply remove the grate with your fingers and then clean it with compressed air, or soak it in water and then let it air dry. Then simply insert it back into place. Once all of this is done, we can reassemble everything; the bench support with its clips. Insert the bench, the door sill, the two outer screws of the support, and it's done. We're good for another year.
Posted on 17 March 2025 by ScegliAuto
Video tutorial
Related tutorials
Toyota Auris
(2012-2018 /
E180)
The traction control deactivation of the Toyota Auris is done by turning on the instrument panel, inserting the ignition key into the corresponding s…
Toyota Auris
(2012-2018 /
E180)
When the message "Maintenance of cooling parts required, visit Dealer" appears for the Toyota Auris, the first step is to check the cooling fan filte…
Toyota Auris
(2007-2012 /
E150)
Today's main instructions will guide you on how to disconnect the electric motor battery on a Toyota Auris. First, open the bonnet of the vehicle and…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to open the fuel tank door in the Hyundai I20?
In this tutorial we can see how to open the fuel tank door in the Hyundai I20, a very simple operation similar to the typical procedure of many vehicles. First of all, let's go inside the cabin, it is not necessary to insert the key or unlock all the locks, then we locate and operate the lever located in the lower left area of the cabin, right next to the driver's seat. Once we have done this, we exit the vehicle, open the door completely and unscrew the fuel tank cap. To close the door, simply press it gently until you hear a click. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.102
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |