Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats from a Toyota Auris

Model: Toyota Auris E150 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Seat

See other generations:
Video tutorial

Today’s procedure will show you how to remove and replace the rear seats from a Toyota Auris in simple steps. First, open the rear doors and start unscrewing all the fastening nuts found under the rear bench and behind the seatbacks, using a socket wrench with an extension; this will allow you to remove both the bench and the seatbacks as a single unit from the cabin, as shown in the video.

At this point, clean or replace them if necessary, then position the seats and proceed with reassembly.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Seat of the Toyota Auris
How to Remove the Rear Seat of the Toyota Auris
Toyota Auris (2012-2018 / E180) Today's instructions will show you how to dismantle and replace the rear seat and backrests of the Toyota Auris, following these simple steps. First,…
How to Remove the Rear Seats (Bench) on a Toyota Auris 2
How to Remove the Rear Seats (Bench) on a Toyota Auris 2
Toyota Auris (2012-2018 / E180) In this short video, see how to remove the rear seats (bench) on a second-generation Toyota Auris in simple steps. First, open the rear doors and sta…
How to Replace the Battery in a Toyota Auris Hybrid?
How to Replace the Battery in a Toyota Auris Hybrid?
Toyota Auris (2018-2024 / E210) To replace the battery in a Toyota Auris Hybrid, loosen the screws that secure the rear seat bench to its housing. Once these screws are loosened, yo…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos