Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cooling Battery Issues on a Toyota Auris

Model: Toyota Auris E180 - Years 2012-2018
Part: Battery

When the message "Maintenance of cooling parts required, visit Dealer" appears for the Toyota Auris, the first step is to check the cooling fan filter. It is located under the seat and collects dirt from the mats. Clean it thoroughly, and it is also advisable to vacuum the cooling fan motor. To clean it, remove the seat, then take off the plastic cover under the seat until you find the filter, which can also be washed, as well as the area beneath the seat. To reassemble, reposition the plastic cover, then put the clips back in place, followed by the seat, and the job is complete.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Clean the Battery Filter in a Toyota Auris
How to Clean the Battery Filter in a Toyota Auris
Toyota Auris (2007-2012 / E150) In today’s video, see how to clean the battery filter in the hybrid Toyota Auris. First, it is recommended to work with the vehicle turned off to avo…
How to Reset the Tyre Pressure Light on a Toyota Auris
How to Reset the Tyre Pressure Light on a Toyota Auris
Toyota Auris (2012-2018 / E180) In this guide, learn how to reset the tyre pressure warning light on a Toyota Auris. If there are issues with the pressure or if the tyres have been …
How to Replace the Battery in a Toyota Auris
How to Replace the Battery in a Toyota Auris
Toyota Auris (2012-2018 / E180) To replace the battery in a Toyota Auris, open the bonnet to access the components inside the engine bay. On the right side, you will find the batter…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos