Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS of the Toyota C-HR

Model: Toyota C Hr Ax50, MK 1, Ax10 - Years 2016-2023
Part:

The TPMS light on a Toyota C HR vehicle indicates that it is necessary to check the tire pressure. To check the pressure, you will need a tire gauge and an air compressor, but first you must turn on the instrument panel and enter the vehicle's menu settings to check the tire pressure status. After that, you can inflate the tires. Then, get into the vehicle and reset the light. If after resetting the light the tire pressure does not change and the light continues to flash on the instrument panel, then you need to check the tire pressure sensor as it may be damaged. The cost for replacing the part is around $200 or 190 € and can be done on your own or at an authorized workshop.

Posted on 23 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the tire pressure warning of the Toyota CH-R.
Resetting the tire pressure warning of the Toyota CH-R.
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) Today's procedure will show us how to reset the tire pressure warning on the Toyota CH-R; before resetting the TPMS sensors, it is necessary for all …
Resetting the tire pressure warning light on the Toyota CH-R
Resetting the tire pressure warning light on the Toyota CH-R
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) Today we will see the necessary instructions in order to reset the tire pressure warning light of the Toyota CH-R; before performing the TPMS sensor …
How to reset the tire pressure warning light on the Toyota CH-R
How to reset the tire pressure warning light on the Toyota CH-R
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) Let's discover in a few simple steps the procedure for resetting the tire pressure monitoring system (TPMS) light on the Toyota CH-R; before performi…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos